10 x 2 Roto Rack/Mixer Console

$219.99 $142.51

Exterior Length: 23.50 in (59.69 cm)
Exterior Width: 23.50 in (59.69 cm)
Exterior Depth: 14.50 in (36.83 cm)



The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.

Note: Item may be pictured with the 1SKB-AV8 Retractable Shelf but is not included with this item.


  • 10U Slanted rackmount on top
  • 2U rackmount in front
  • Steel threaded rails
  • Hard lid and doors
  • Side access ports for cable routing
  • Injection molded front and rear doors and lid
  • Two TSA locking patented trigger latches
  • Stackable for storage and transport


Exterior Length
23.50 in
59.69 cm
Exterior Width
23.50 in
59.69 cm
Exterior Depth
14.50 in
36.83 cm
Carton Length
24.00 in
60.96 cm
Carton Width
24.00 in
60.96 cm
Carton Depth
15.00 in
38.10 cm
Rack Space Units Top
Rack Space Units Bottom
Rack Depth Front Rail to Back Lid
0.00 in
0.00 cm
Shipping Weight
23.00 lb
10.43 kg
Product Weight

The top rack has 17.5″ rackable depth plus 2.25″ in back for cables for a total of 19.75″ on the top.

The lower 2U Rack is 3.5″ high in front and 5.75″ high in the rear with a 19.5″ of useable depth.

The following products have been checked by an SKB Product Specialist and do fit in the 10 x 2 Roto Rack/Mixer Console:

  • Allen & Heath XONE:23
  • Allen & Heath XONE:23C
  • Allen & Heath XONE:464
  • Allen & Heath XONE:4D
  • Allen & Heath XONE:92
  • Allen & Heath XONE:DB2
  • Allen & Heath XONE:DB4
  • Allen & Heath XONE:S2
  • Allen & Heath ZED-10
  • Allen & Heath ZED-10FX
  • Behringer DX2000USB
  • Behringer Eurorack Pro RX1202FX
  • Behringer Eurorack UB1202
  • Behringer Eurorack UB1202FX
  • Behringer Eurorack UB1204-PRO
  • Behringer Eurorack UB1204FX-PRO
  • Behringer Eurorack UB1222FX-PRO
  • Behringer Eurorack UB1622FX-PRO
  • Behringer Eurorack UB2222FX-PRO
  • Behringer Eurorack UB2442FX-PRO
  • Behringer NOX1010
  • Behringer VMX1000
  • Behringer VMX1000USB
  • Behringer Xenyx 1002
  • Behringer Xenyx 1002B
  • Behringer Xenyx 1002FX
  • Behringer Xenyx 1202
  • Behringer Xenyx 1202FX
  • Behringer Xenyx 1204FX
  • Behringer Xenyx 1204USB
  • Behringer Xenyx 1832FX
  • Behringer Xenyx Q1002USB
  • Behringer Xenyx Q1202USB
  • Behringer Xenyx Q1204USB
  • Behringer Xenyx Q502USB
  • Behringer Xenyx Q802USB
  • Behringer Xenyx QX1002USB
  • Behringer Xenyx QX1202USB
  • Behringer Xenyx QX1204USB
  • Behringer Xenyx QX1222USB
  • Behringer Xenyx QX1622USB
  • Behringer Xenyx QX1832USB
  • Behringer Xenyx QX2222USB
  • Behringer Xenyx X1222USB
  • Behringer Xenyx X1622USB
  • Behringer Xenyx X1832USB
  • Behringer Xenyx X2222USB
  • Behringer Xenyx X2442USB
  • Mackie 1202VLZ4
  • Mackie 1402VLZ3
  • Mackie 1402VLZ4
  • Mackie 1604VLZ4
  • Mackie 1642VLZ4
  • Mackie 402VLZ4
  • Mackie DL1608
  • Mackie DL806
  • Mackie Onyx 1220i
  • Mackie Onyx 820i
  • Mackie ProFX16
  • Soundcraft EFX12
  • Soundcraft EPM12
  • Soundcraft MFXi 12
  • Soundcraft MFXi 8
  • Soundcraft MPMi 12
  • Yamaha MG12
  • Yamaha MG124C
  • Yamaha MG124CX


SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty.


Whom do I call for replacement parts? Contact our Customer Service Department at 800-783-0087.

Do you make custom cases? Minimum quantities are required. Contact our Industrial Division at 800-783-0087 or see our Custom Cases page.

What do I have to do before I return my case or rack for repair? Contact our Customer Service Department at 800-783-0087 for a Return Authorization Number.

Does a Warranty Card come with my case? No warranty card is necessary. Just remember to keep your proof of purchase.

Where will I find my model number on my case? It is not on your case. You will find the number on your original proof of purchase receipt. That is why it important to keep your original receipt.

How long will a repair take? Usually about two weeks from the time we receive your case.


Additional information

Weight N/A
Dimensions N/A

Black, Custom Rack